Description

Technical Specifications

Mechanical

Dimensions442 x 325 x 44 mm (17.4 x 12.8 x 1.7″)

WeightWithout mounting brackets: 5.1 kg (11.3 lb)
With mounting brackets: 5.2 kg (11.5 lb)

Enclosure materialSGCC steel

Hardware

Management interfaceEthernet In-Band

Networking interface(16) GbE RJ45 ports
(8) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports

PoE interface(8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 😎

Total non-blocking throughput56 Gbps

Switching capacity112 Gbps

Power method(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input

Power supplyAC/DC, internal, 450W

Supported voltage range100—240V AC

Max. power consumption50W (Excluding PoE output)

Total available PoE400W

Max. PoE wattage per port by PSE PoE: 15.4W
PoE+: 30W
PoE++: 60W

Voltage range PoE mode PoE: 44—57V
PoE+: 50—57V

LCM display (1) 1.3″ touchscreen

ButtonFactory reset

Ambient operating temperature-5 to 40° C (23 to 104° F)

Ambient operating humidity10 to 90% noncondensing

CertificationsCE, FCC, IC

Switching Features

Layer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs

Layer 3 featuresDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs

Etherlighting™

Ethernet Locating
Speed/link
Native VLAN/network

SFP+Locating
Speed/link
Native VLAN/network

LEDs

SystemStatus

RPSStatus

Application Requirements

UniFi Network Version 8.0.24 and later